48 lines
1.8 KiB
C++
48 lines
1.8 KiB
C++
/*
|
|
Basic ESPiLight transmit example
|
|
|
|
https://github.com/puuu/espilight
|
|
https://github.com/LSatan/SmartRC-CC1101-Driver-Lib
|
|
----------------------------------------------------------
|
|
Mod by Little Satan. Have Fun!
|
|
----------------------------------------------------------
|
|
*/
|
|
#include <ELECHOUSE_CC1101_SRC_DRV.h>
|
|
#include <ESPiLight.h>
|
|
|
|
int TRANSMITTER_PIN;
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
|
|
#ifdef ESP32
|
|
TRANSMITTER_PIN = 2; // for esp32! Transmit on GPIO pin 2.
|
|
#elif ESP8266
|
|
TRANSMITTER_PIN = 5; // for esp8266! Transmit on pin 5 = D1.
|
|
#else
|
|
TRANSMITTER_PIN = 6; // for Arduino! Transmit on pin 6.
|
|
#endif
|
|
|
|
if (ELECHOUSE_cc1101.getCC1101()){ // Check the CC1101 Spi connection.
|
|
Serial.println("Connection OK");
|
|
}else{
|
|
Serial.println("Connection Error");
|
|
}
|
|
|
|
//CC1101 Settings: (Settings with "//" are optional!)
|
|
ELECHOUSE_cc1101.Init(); // must be set to initialize the cc1101!
|
|
//ELECHOUSE_cc1101.setRxBW(812.50); // Set the Receive Bandwidth in kHz. Value from 58.03 to 812.50. Default is 812.50 kHz.
|
|
//ELECHOUSE_cc1101.setPA(10); // set TxPower. The following settings are possible depending on the frequency band. (-30 -20 -15 -10 -6 0 5 7 10 11 12) Default is max!
|
|
ELECHOUSE_cc1101.setMHZ(433.92); // Here you can set your basic frequency. The lib calculates the frequency automatically (default = 433.92).The cc1101 can: 300-348 MHZ, 387-464MHZ and 779-928MHZ. Read More info from datasheet.
|
|
ELECHOUSE_cc1101.SetTx(); // cc1101 set Transmit on
|
|
}
|
|
|
|
// Toggle state of elro 800 switch evrey 2 s
|
|
void loop() {
|
|
ESPiLight rf(TRANSMITTER_PIN);
|
|
rf.send("elro_800_switch", "{\"systemcode\":17,\"unitcode\":1,\"on\":1}");
|
|
delay(2000);
|
|
rf.send("elro_800_switch", "{\"systemcode\":17,\"unitcode\":1,\"off\":1}");
|
|
delay(2000);
|
|
}
|